Posted on 4 Comments

See Through Card Class II

The Tonic Studios Budding Vine die was our featured die in the See Through Card Class – click here to see what we did. However I also managed to create some further cards using the same die, but with different techniques – these are what I will be sharing here. I will also share here a couple of cards using the other two die sets in the range – they are such great value with both the intricate background AND an interesting frame which can be used together, mixed and matched, or as standalone dies.

We also used the Pink Fresh Studio Floral Square Frames die set in class, and I have used this die set again in a couple of examples below.

The sentiment set featured on all the cards is My Favorite Things Essential Sentiments, Such a great set, and it covers a large array of occasions.

All dies and stamps used are available to order/purchase from Scrapbook Central.

All cards today are 5.5″ x 4.25″ apart from the square floral frames which is 4.25″ x 4.25″.

I also use a mixture of Bazzill Marshmallow and Neenah white cardstock – for more information about which cardstocks to use for your projects, you can check out my Best of the Basics Cardstock article.


Shaker Card

I used the Budding Vine die together with a Stitched Rectangle to create a full card sized shaker front. I backed the piece with acetate and added foam tape to all sides, ensuring there were no gaps for sequins or beads to escape. My foam tape was fairly shallow in depth, so I did two layers of it so my shaker elements have plenty of room to move freely. I also used my powder tool to reduce the stickiness on the edges of the foam tape and reduce static cling in general. I chose the sequins and beads to complement the colour of my cardstock and colouring and made a small pile in the centre of my card base. I adhered the foam tape/acetate/die cut card front on top – press down firmly to ensure there are no gaps!

To finish the card, I cut three of the Pink Fresh Studio flower frame Daisy (two in white, one in matching green cardstock) and layered them on top of each other with the green layer on the bottom. I also included the white petals on the bottom layer only, for depth. I coloured the flower centre with YR16, Y17 and Y15 markers, with a final layer of Nuvo crystal glaze. The sentiment is gold heat embossed on the light green cardstock and is from the MFT Essential Sentiments.


Partial Die Cut Card Front Card

This card was really simple to achieve. I had an inky panel in my box of background pieces to be used up (don’t we all have a box of those??). For the front, I placed just the intricate die on an angle towards the top half of the white cardstock. It is not a true partial die cut in terms of technique, but achieves a similar result.

I used a piece of white craft foam on the bottom half, and foam square dimensionals to lift the entire front off the inky panel which is then adhered directly to the card base. This gives the card gentle dimension and interest. A sentiment was gold heat embossed and little gems added to finish off.


Flower Frames Panel Card

I love these little flower frames so much – they make a nice finishing touch to a card on their own, or in this case, become the main feature.

I used different colours of Distress ink to create the bottom of each of the frames. Each of the flower frames were die cut three times – this may sound labour intensive, but it is definitely worth the effort. Stacked die cuts give great dimension and interest to a card, plus a nice finished look. I arranged them into a square format with equal distancing onto a card base, and white heat embossed a sentiment on a brushed gold strip of cardstock. I liberally used Nuvo glimmer gloss pens on the inside of my frames to finish.


With Love Quatrefoil Card

I love the look of quatrefoil, and this die set is no exception. I had a rainbow alcohol inked Yupo panel in my box of panels, and I die cut it with the quatrefoil die. I also cut two panels from white cardstock – one of the frame on its own, and also with the quatrefoil and frame together. I covered the plain panel with double sided adhesive, and glued the intricate panel on top to match – leaving the gaps already sticky with adhesive and no further glue required.

I then inlaid the rainbow pieces into the white frame. Yupo paper can be die cut fairly easily, but the pieces do tend to stay together within the die cut, so it was mostly a case of laying it over the white cardstock and simply poking the pieces out into their respective spots. So it didn’t take as long as you might have imagined!

The frame was attached to a card base, and then the card was finished off with a With Love sentiment from Tonic, and a black heat embossed sentiment strip from the My Favorite Things Essential Sentiments.


Floral Bloom Glazed Card

I have previously shared this card on my social media channels – please click here to visit my earlier blog post to see full details of how this card came together.

If you have any questions regarding the putting together of any of these cards, please feel free to message me – I’m only too happy to help!

For more in-depth information about the best value supplies for your craft table, from cardstock to the handiest tools, check out my Best of the Basics series.

Thank you for reading this far! Also, if you were an attendee of my See Through Card Class, a very special Thank You to you. Also, keep an eye on my main page for my upcoming Gift Tag Class in October……

I’d appreciate it if you hit Follow below, and/or follow my Facebook page so you’ll be kept up to date with upcoming classes. I regularly share other cards, along with tips, hints and ideas.

Follow me on my social media channels:

Posted on 1 Comment

Confetti Filled Diamonds

Cards that weren’t my original intention, but, in my play session, I ended up with two very different cards using the Pinkfresh Simply Diamonds die and Pop Out Diamonds rubber stamp. It’s a little bit of a journey!

I started by stamping the Diamond frame only, and cutting it out. I was impressed at how easy it was to have the heat embossed frame lines cut perfectly centrally with the die. There is a frame on the outside of the stamp itself which is 1/4″ wide all around, also equaling one square in the Misti for ease of lining up.

I was also suddenly taken with the idea of stamping that gold frame on a richer coloured cardstock – Peacock by Lawn Fawn. Delicious!!

Original vague plan now abandoned, I focussed on the Peacock piece. I decided to stack up the diamond pieces remaining from frame cut outs, leaving the gold frame peeping out from between them.

I stamped the flower images using Antique Linen Distress Ink and watercolored them with Ken Oliver Color Bursts (Fuchsia, Yellow, Turquoise and Lime Green). They are such fun to paint – quick and easy to do!

I had a spare Happy Birthday die cut from the Pinkfresh Classic Words set in my box which I placed in the middle. It didn’t stand out very well so I added a second glittery layer. I wish now I had used the ‘Beautiful’ sentiment from the Classic Words set instead, but hey, live and learn.

I added teeny gems in the intersections to finish.


My attention turned back to the original frame – I decided to create a confetti shaker. I stacked the plain frames I had cut, and glued them to a background I had in my stash. This was a watercolour piece of cardstock inked up with Distress Oxides in Blueprint Sketch, Salty Ocean and Peacock Feathers.

I chose confetti to match the colour blends.

I put the blue hexagons in the top row, plus in the top half of the two diamond openings in the second row. I then completed filling the second row with purple butterflies, along with the third row plus the top half of the diamond openings in the fourth row. I filled the remainder of the openings with turquoise stars. The result is a blended effect with the confetti. The heat embossed frame and acetate attached on top to seal them all in.

I was a little generous with my confetti (or short a layer or two of cardstock lol) so the confetti doesn’t shake around too much.

With a bold, glittery card all done, I felt it needed a bold glittery birthday sentiment – learned from previous mistake hahaha.

I chose The Stamp Market’s Happy Birthday from their Time to Celebrate bundle (sadly apparently discontinued, my apologies), cut twice from white cardstock and once from gold glitter, stacked.

I considered gems, but after doing an initial placement, decided against it.

Both card fronts were mounted onto #110 Neenah top folding card bases. There, two cards created with the Pinkfresh Diamonds – such fun!

This completes my pair of cards today. Thank you for stopping by! Below are links to the products I have used – some are affiliate links (not all) which simply means I may get a small commission at no extra cost to you when shopping. Thank you for your support – it means I can keep creating and sharing with you.

https://linkdeli.com/widget.js?id=f5e8378456858c916708

For more in-depth information about the best value supplies for your craft table, from cardstock to the handiest tools, check out my Best of the Basics series.

Follow me on my social media channels:

Posted on 2 Comments

Ornate Floral Shaker

It’s a crafty friend’s birthday – Happiest of Birthdays to Julie! She makes amazing cards (check out her Instagram) so I wanted to create a card that was extra special. Also, with all of my best stuff!

I made a pair of cards a few weeks ago with the Pinkfresh Ornate Floral die and wanted to step it up a little this time around.

I cut the Ornate Floral die three times from white, once from Gina K Grass Green and once from gold mirror cardstock.

I glued the dark green frame onto a light green card base – Sprout from the Concord & 9th sample pack of their newly released cardstock. I infilled the leaves with Grass Green and the flowers with white petals.

On my first attempt at this card, I had left the petals white, but the end result was too stark, so this time I coloured the petals with light Copic colours of the intended shaker pieces. You could use any marker or colouring medium here, just as long it has plenty of time to dry. As you can see, I didn’t do anything fancy, no shading.

Copics used: V12, B32, RV02, B00

I stacked the white dies together and glued the stack on top. The gold die cut is glued to the top of the acetate sheet, and kept aside.

Pro Tip for next step – ensure windows and doors are closed, and heat pump isn’t blowing!

I used Nuvo Confetti for my shaker elements, as I didn’t want my card to be too outrageously thick. To keep the confetti under some control, I covered the card where I didn’t want it to fall (with post-its and the acetate top), and carefully filled the petals and leaves with the appropriate colours. I found the Nuvo spoon great for this, as it has a narrow, funnel type end.

Any escapees were picked up with my jewel picker – surprisingly few escaped, even with my clumsiness!

The acetate window was placed on top, securing all those teeny pieces in their places. Relief!

I made sure all my stacked pieces were well secured, that confetti can slip through the tiniest gaps :/

I have kept the finishing touches super simple, as this card is a bit of a statement all by itself. I used the Pinkfresh Happy Birthday from the Classic Words set, cutting the shadow from platinum vellum and the words from Pitch Black and Grass Green cardstock, stacked a couple of times.

And final touch, glitter drops for the flower centres.

This completes my bright and sparkly card today. Thank you for stopping by! Below are links to the products I have used – some are affiliate links (not all) which simply means I may get a small commission at no extra cost to you when browsing/shopping. Thank you for your support – it means I can keep creating and sharing with you.

https://linkdeli.com/widget.js?id=f5e8378456858c916708

If you have any questions regarding the putting together of this card, please feel free to message me – I’m only too happy to help!

For more in-depth information about the best value supplies for your craft table, from cardstock to the handiest tools, check out my Best of the Basics series.

Follow me on my social media channels:

Posted on Leave a comment

Spellbinder Truck Cards

I got to have a serious play with the Spellbinders October Die of the Month (which has actually been released as a permanent fixture in the shop – yay!)

Now this is a LARGE set, and I will freely admit I was a little bewildered by all the teeny pieces! I realised I needed to watch a Nichol Spohr video to get myself untangled. She has a couple of really great YouTube video tutorials on the two different releases relating to these trucks – here and here. I really encourage you to take a look 🙂


So my first card was really a total CASE of her Christmas truck – there isn’t really anything to add, other than I used what I had in my stash in terms of appropriate sentiment (Simon Says Stamp Season’s Greetings) and scraps of cardstock. Also, the embossing folder I used is an old Stampin’ Up! one which really does look cool!


Then I got a little more confident and tried out a grey truck for a wedding card – again following a colour palette similar to Nichol, but I added my own twist. I really love the Simon Says Stamp Stacked Hearts die, and cut it from pearlescent pink cardstock to inlay into the card front. Little clay hearts from Honey Bee Stamps and a Congrats sentiment from PinkFresh Studio were the finishing touch.


The last card is a simple birthday card and I really wanted to do a blue truck with off-white bumpers, like a classic truck featured in a favourite Canadian television show (a chocolate fish if you guess the show!) The Happy Birthday is a My Favorite Things die (unfortunately retired), and the embossing folder is an old one found in my stash.


As you can see, the Truckin’ Along set can be used alongside many items in your stash, a great way to feature products that haven’t been used on a project in a while. Or ever! I’m sure I’m not the only crafter with things in my stash that have been purchased and not yet used!

Thanks for taking the time to visit! If you have any questions regarding the putting together of these cards, please feel free to message me – I’m only too happy to help!

For more in-depth information about the best value supplies for your craft table, from cardstock to the handiest tools, check out my Best of the Basics series.

Follow me on my social media channels: